Product Informations
Product Specifications
| Type | Mechanical movement |
|---|---|
| Line | mechanicals |
| Caliber | R01-01 |
| Size | 12½''' |
| Version Swiss Made | 25 jewels |
| Standard hand fitting height | 2 |
Functions
| Date |
| 3 hands |
Features
Uni-directional automatic winding with ball bearing |
Silicon escapement and spiral |
Runing time typically 80 h / minimum 72 h |
Winding mechanism
| Winding mechanism | Automatic |
|---|---|
| Main spring | Bio-Flex / Nivaflex Plus |
| With winding stem | Turns | Max. speed |
|---|---|---|
| Manual winding | 85 | 100 |
| Self winding mechanism | Turns per minute | Winding time |
|---|---|---|
| Automatic winding with Cyclomotion | 4* | min. 7h |
| Automatic winding with Chappuis | 22* | min. 2.5h |
| * Note the direction of rotation | ||
Specifications
Technical Specifications
| Diameter Total | 28.60 mm |
|---|---|
| Case fitting | 28.20 mm |
| Movement height | 4.20 mm |
| Movement rest | 1.30 mm |
| Height over stem | 1.80 mm |
| Length of stem travel | 0.90 mm |
| Stem thread | 0.90 mm |
| Stem max Ø | 1.50 mm |
| Frequency: vibrations per hour | 25'200 A/h (3.5 Hz) |
| Power reserve | typ. 80 h / min. 72 h |
| Date switching duration | <30 min. |
| Operating temperature | 0-50 °C |
|---|---|
| Resistance against shock | NIHS 91-10 |
Performances
| Escapement | |||
|---|---|---|---|
| Performance | Elaboré | Top | Chronomètre |
| Running time | min. typ. 80 h / min. 72 h | ||
| Escapment | Swiss silicone escapment | ||
| Balance spring | Silicone | ||
| Fine timing device | with screws on the balance wheel | ||
| Shock absorber | KIF / Incabloc | ||
| Barrel spring | Bio-Flex / Nivaflex Plus | ||
| Regulation | ||||||
|---|---|---|---|---|---|---|
| Performance | Elaboré | Top | Chronomètre | |||
| Positions | 0h | CH, 6H, 9H | CH, CB, 6H, 9H, 3H | CH, CB, 6H, 9H, 3H | ||
| Average value of rate | 0 ... 14 s/d | 0 ... 8 s/d | COSC criteria / ISO 3159 | |||
| Max. divergence all positions | 20 s/d | 15 s/d | COSC criteria / ISO 3159 | |||
| Isochronism | CH 0h - CH 24h | ± 15 s/d | ± 10 s/d | COSC criteria / ISO 3159 | ||
| Max. amplitude | CH 0h | 315° | ||||
| Min. amplitude | 6H 24h | 200° | ||||
| Lift angle | 53° | |||||
| 0.8 ms | 0.6 ms | 0.6 ms | |||
| Stabilisation time / rate resumption | 20 s Recommended value | 20 s Recommended value | 20 s Recommended value | |||
| Integration time / Measuring | 40 s Recommended value | 40 s Recommended value | 40 s Recommended value | |||
| Temperature | 23 °C | 23 °C | as per COSC / ISO 3159 | |||
| The limit values are subject to interpretation: 95% of the pieces delivered in a lot must be within the specified limit values. | ||||||
| All checks are made without the calendar in function. The check at full winding, referred to as 0h, has to be done after 1 to 3 hours running. The check indicated as 24 h takes place 24 to 25 hours after full winding. | ||||||
| When checking the instaneous rate and the amplitudes, the inherent tolerance of the measuring instruments and the influence of temperature variations and the atmospheric pressure must be taken into account. | ||||||
Decorations
Matte
Bridges with matte finish
Bimetal Oscillating weight, matte
Nickel-plated
Brushed
Bridges vertically brushed
Monobloc Oscillating weight with Geneva stripes
Rhodium-plated
Geneva stripes
Bridges with Geneva stripes and colimaconnage
Open Oscillating weight
Rhodium-plated
Oscillating weights
Standard Bimetal
Bimetal Oscillating weight, matte,
Nickel-plated
Optional custom branding
Standard Monobloc
Monobloc Oscillating weight with Geneva stripes
colimaconnage bevel,
Rhodium-plated
Optional custom branding
Geometric Monobloc 4 Openings
Monobloc Oscillating weight with 4 openings,
matte, colimaconnage bevel
Rhodium-plated
Optional custom branding
Geometric Monobloc 5 Openings
Monobloc Oscillating weight with 5 openings,
matte, colimaconnage bevel,
Rhodium-plated
Optional custom branding
Geometric Monobloc 6 Openings
Monobloc Oscillating weight with 6 openings,
matte, colimaconnage bevel,
Rhodium-plated
Optional custom branding
Custom made – Your Design
Custom-made Oscillating weight,
based on your design
Technical documents
Terms of warranty
| Terms of warranty |
|---|
Watch production
| Drawing Casing ring | |
|---|---|
| Drawing Dial | |
| Drawing Hand fitting | |
| Drawing Stem | |
| Casing information | |
| Manual winding test |
User's manual
| User's manual | PDF with folding marks |
|---|
Watch repairs
| Technical instruction |
No PDF available
No Interactive Version available
|
|---|
Movement holders
Movement holders
Various info
Various info
Product Symbol
 |
| R01-01 |
Follow us on Social Media: